Your shopping cart

CMOS, BSI Sensor or Stacked Sensor - What are the differences?
Reading time: 10 minutes - August 03, 2023 - by Markus Igel

Camera Basics #13 - CMOS, BSI Sensor or Stacked Sensor? What are the differences?

As a specialty retailer, we have a mission: to provide you with the best possible advice and help you better understand the differences between the various technologies that can be found on the camera market. That's why today we want to introduce you to the different sensor technologies. Especially the differences between the stacked sensor and the BSI sensor.

We are looking forward to your feedback to this article! Just send us an email to content@fotokoch.hu

The history of the different image sensors

The first sensors were based on the CCD array sensor and the Bayer (CCD) sensor, while modern camera sensors use CMOS system. The CCD sensor was once incorporated in a two-layer variant in the first digital cameras and video cameras and was mainly used in astronomy. Bayer sensors are photosensors covered with a color filter, thus having a checkerboard of different colored photocells. These sensors have 50% green, 25% red, and blue sensors.

Expertise for show-offs:

Incidentally, it is the green component that essentially determines the sharpness and resolution on a lens. Since the green color has one of the greatest influences on the contrast & brightness perception when viewed in gray tones (about 72%).

The modern Active Pixel Sensor (CMOS sensor) is based on semiconductor technology and measures the incident light. CMOS technology has made many things possible, such as further technical integrations like exposure control or contrast correction.

CMOS sensor of the common methods side by side

The CMOS sensor in detail

Previously, we discussed the different technologies of the last few years, but now we want to focus on the modern CMOS technology. These sensors are particularly well suited to perceive infrared radiation, there is also a separate scene here, which makes the cameras sensitive to this spectrum of light.

Advantages of CMOS sensors

  • smaller size due to saving of components, which are now connected to the sensor
  • lower power consumption
  • Possibility of high frame rates (frames per second)

Classic CMOS sensor

In a classic CMOS sensor, the metal interconnects are located on the front side, behind the color filters. Behind the metal interconnects are the photodiodes. This design has the disadvantage that the dynamic range is degraded by the interconnects and the sensor offers slower autofocus performance than the backside illuminated sensor would allow.

Backside Illuminated CMOS (BSI CMOS)

Here, the sensor structure is designed in such a way that the metal connections are applied to the rear of the sensor. This design offers a higher dynamic range while still being much faster in readout speed than the classic CMOS sensor. The sensor also offers better low light performance because the diodes no longer lose light to the metal interconnects. Due to the line-by-line readout, the rolling shutter effect is present, but the ISO noise is significantly improved.

Stacked CMOS (BSI Stacked CMOS)

Here, there are now two metal connections on the back, which ensure that the sensor can be read out faster. In combination with a large and fast DRAM, it is thus possible to get a considerable amount of images into the camera's buffer. Depending on how advanced this sensor is, the readout delay is reduced to almost zero, as was the case with the mechanical shutter. Did you know that Stacked CMOS technology has not been used in cameras for very long? Sony has only been using these image converters, among others, since 2015.

Advantage of the stacked technology

  • higher frame rate
  • no distortion when using the electronic shutter
  • higher precision for autofocus & exposure

Fujifilm's X-Trans technology

In the historical part, we explained the Bayer system with its color pixels arranged in a checkerboard pattern. In the X-Trans arranged color filters there is always a pixel combination of 4-6 green color filters, while in the Bayer sensor the technology alternates the color line by line. This technology can now also be found in the Bayer sensor system and enriches it with a Quad Bayer Array, where instead of one color field per line, 4 color fields are combined, which are then recombined by the software (pixel binning). These quad Bayer sensors are often used in smartphones, action cams or drones that have high megapixels.

The advantages of X-Trans technology are the reduction of moir? effects and the improved green tones, which also have an effect on sharpness.

The Canon Dual Pixel Sensor Model

Canon's technological development of the Dual Pixel Sensor puts two photodiodes under each microlens instead of one. This allows light to be measured at two different angles for greater raw flexibility. If you use Canon's own software, you can also shift the bokeh and sharpness, for example. Of course, in this case we are talking about minimal adjustments, but they are sometimes crucial.

Likewise, the software can also be used to subsequently reduce or change the flaring and ghosting of the image, since the photodiodes both recorded different information.

When using the Dualpixel Raws, the camera stores two images in one instead of one, offering a greater variety of possibilities. The only real disadvantage here is that the file size is twice as large.

Conclusion

With the current Stacked CMOS BSI technology, we sometimes almost reach the physical limits that the readout rate and the dynamics of the image converters can allow. When we look at modern sensors, it makes perfect sense to talk about the installed processors and the memory sizes of the caching components. Because these still give the cameras one or the other noticeable upgrade. Because the more artificial intelligence and video formats / codecs move into the cameras, the more power the installed processor needs.

If you have a BSI or a Stacked CMOS (Stacked CMOS BSI), you will have some advantages with your camera, which make the cameras all the more versatile.

Sony Alpha 7 IV (ILCE-7M4) Gehäuse

2.089,52
2.389,52
You pay today 2.389,52
After the purchase you will receive 300,- Euro back from Sony. further information
Neuheit

Canon

5.121,62

Nikon

3.200,61

Sony Alpha 7R V (ILCE-7RM5) Gehäuse

4.401,45
4.801,45
You pay today 4.801,45
After the purchase you will receive 400,- Euro back from Sony. further information

Sony Alpha 7 III (ILCE-7M3) Gehäuse schwarz

1.395,82
1.695,82
You pay today 1.695,82
After the purchase you will receive 300,- Euro back from Sony. further information
Nikon Einsteigerkurs gratis
+ 1 more

Nikon Z6 II Gehäuse

1.840,11
2.240,11

OM SYSTEM

2.160,28
2.560,28
You pay today 2.560,28
After the purchase you will receive 400,- Euro back from OM SYSTEM. further information

Fujifilm

1.599,77
Nikon Einsteigerkurs gratis
+ 1 more

Nikon Z7 II Body

2.995,17
3.495,17

Sony Alpha 7R IVA (ILCE-7RM4A) Gehäuse

3.647,67
3.947,67
You pay today 3.947,67
After the purchase you will receive 300,- Euro back from Sony. further information
Olympus Einsteigerkurs gratis
200,- Sofortrabatt
+ 1 more

A little task for you:

Which sensor do you have? Just check your technical data. Especially if you have an older camera, you can also come to D?sseldorf with a memory card and look at a modern sensor and compare the pictures at home.

Show us your pictures on Instagram and/or Facebook and tag us @fotokochde! We are looking forward to your results!


Thanks for reading this article. If you're interested in more photography basics, then check out the other camera basics

Get to know your camera ? Discover the fun of photography

You bought a camera and are taking your first steps in photography? With the automatic mode you miss a lot of potential! Photography is only really fun when you understand your camera and know exactly which settings you need to get the photo you want. Learn the importance of the functions and ignite your enthusiasm for photography!

Go to all camera basics

More articles about getting started in photography

Camera Basics #22 - What are chromatic aberrations?

We have already written so many technical blog articles about the basics of photography and videography, but we have not yet talked about one of the most well-known optical errors (aberrations), chromatic aberrations.

Read now

Camera Basics #21: Getting started with sports photography

We confidently say that this article is one of the best ever for sports photography. In the guide, we also try to cover the various equipment decisions and how to find the perfect settings.

Read now

Camera Basic #03 - What is ISO sensitivity?

ISO is one of the core elements of photography. If you understand ISO, you can work much better with the light in many situations and can also use ISO noise as a stylistic device for your photos.

Read now

Camera Basic #20 - Open Gate and its advantages for social media explained

Social media has become indispensable and the technology continues to develop. Open gate technology offers the possibility of reading the full sensor for video, but what does that mean?

Read now

Camera Basics #19: Tilt shift lenses and the effect explained

The tilt shift effect is certainly an old shoe for many photographers, but this effect is very interesting to consider because it can be found in many facets of photography, so the use of tilt shift optics is not only at home in architectural photography.

Read now

Camera Basics #18: Megapixel explained

Everyone needs 100 megapixels! Or do they? Many photographers or smartphone owners always have discussions about megapixels. That's why we explain today what consequences megapixels have!

Read now

Camera Basics #17: Colorgrading with LUTs - 3D Luts

Almost nothing is as controversial as the use of color, the choice of the right colors is a major factor in the mood and feel of an image. Purists swear by the colors that come directly from the camera, and others edit the colors in post-processing down to the smallest detail.

Read now

Bird's eye view, the world from above | Camera Basics #16

In photography, there are many things that influence the effect of an image on the viewer. The choice of perspective is one of the first things that can be determined on location; this goes hand in hand with the choice of focal length or other settings.

Read now

Interesting campaigns

New bargains every day

Look forward to new top offers every day that are only valid for a short time!

Secure deals

Newsletter

Latest offers, exclusive benefits, news, events, info more

Subscribe now

Demo equipment exhibits

Check out our demo equipment showrooms and save!

Save now

Demo equipment + exhibits

Check out our demo units + showroom items and save!

Save now

Also interesting

Watch it again now: Canon EOS R5 Mark II News Talk

We were able to talk about the new Canon camera immediately after its release. Our guest was Silke an Mey, who was able to try out the new camera.

Read more

Canon EOS R5 II - A camera that sets new standards?

It's finally here! With the new EOS R5 II, Canon has unveiled a new flagship camera that completely rethinks not only photography but also videography. Find out what the camera can do in our blog post with video.

watch now!

Hands On: Canon EOS R1 - the number one for sports?

Finally there is a new number 1 at Canon. We had the opportunity to test the new EOS R1 in advance and tell you what the new flagship can do and, of course, whether it can meet the high demands of sports photography.

watch now!

Sony - The Choice for Landscape

Are you still looking for the perfect equipment for breathtaking landscape shots? Then Sony is the answer! With its Alpha cameras and G, as well as G-Master lenses, you can set new standards in landscape photography. Unleash your creativity and experience unparalleled image quality.

discover now